Aquasan Kristal

  • contains no chlorine
  • effective against wide spectrum of bacteria
  • efficiently inhibits infections
  • causes no irritation to eyes, throat, mucous membranes
  • exhibits no skin-drying, hair-bleaching and fabrics-bleaching effect
  • resistant to temperature, UV light
  • easy to use
  • Dosage: First dosage 0,5 l per 10m3 of water is applied at pool opening, 3 days after Oxi shock application. Then 0,25 l per 10 m3 dosage is required on a monthly basis.
  • The solution is prepared in a bucket of water and poured into water while circulation pump is running. Water is suitable for swimming immediately.
  • While monitoring water quality by Oxi Pool tester, add Aquasan Crystal in the amount of 0,25 l per 10 m3, when value measured drops below 30 ppm.

Aquasan Oxi Shock

  • contains no chlorine
  • oxygen based product
  • kills bacteria, microorganisms and destroys algae and other organic impurities
  • it is easy to use, there is no need for frequent monitoring; feeding at intervals
  • Dosage: First dosage 1 liter per 10m3 of water is applied after filling the pool with water. Then 0,5 l per 10 m3 dosage is required every fortnight. The solution is prepared in a bucket of water and poured into pool water while circulation pump is running (apply in the evening; otherwise circulate water at least 3 - 4 hours prior to swimming).
  • While monitoring water quality by Oxi Pool tester, add Aquasan Oxi Shock in the amount of 0,5 l per 10 m3, when value measured drops below 30 ppm.